$568.00
Albi Clad TF+
Water Based Thin-Film Intumescent Coating (Paint)
White. 5 Gallon
Can be used as ASTM E-199/UL 263 Fire Resistant Intumescent Coating or ASTM E-84 Class”A” Fire Retardant Fireproofing.
Up to 4 hours Fire Rating. UL Certified. Reduced DFTs. Cost effective solution to help existing and new building construction meet and exceed fire rating code requirements. Decorative aesthetic architectural finish. Compatible with most non-solvent based topcoats.
RELATED PRODUCTS
In Stock
Description
BENEFITS
- Albi Clad TF+ is listed by Underwriters Laboratories for up to 4 hours of fire protection.
- Albi Clad TF+ is applied like paint using an airless spray pump leaving an attractive architectural finish. This durable, abrasion-resistant surface does not require a top coat.
- Reduces DFTs.
- A topcoat can be used for decorative purposes and is suggested if repeated washings are required.
- It is VOC compliant and meets all LEED standards.
- UL tested for resistance to high humidity, aging, industrial atmosphere (CO2Â /SO2), and washing.
PHYSICAL PROPERTIESÂ Â Â Â Â Â TEST METHODÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â VALUE
Dry Applied Density                                           85 PCF
Hardness (Shore D)Â Â Â Â Â Â Â Â Â Â Â Â ASTM D2240Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 67
Cohesive/Adhesion Strength   ASTM D4541                    485 psi
Abrasion Resistance           ASTM D4060                    0.111 grams loss (1,000 cycles)
Impact Resistance            ASTM D2794                    160 inch-lb@2 mm 11.5±
Weight per Gallon                                             11.5 + 0.20 lbs./gals
% Solids by Volume                                           70% ± 2.0%
Flame Spread                 ASTM E 84                      5 – Class A
Smoke Developed             ASTM E 84                       35 – Class A
DOWNLOADS
UL TESTING
RELATED PRODUCTS
Product Categories
Intumescent Coatings & Fireproofing Patch
TENMAT Firestop Products
DeFelsko DFT Digital Gauges
