$440.00

Albi Clad TF+

Water Based Thin-Film Intumescent Coating (Paint)
White. 5 Gallon

Can be used as ASTM E-199/UL 263 Fire Resistant Intumescent Coating or ASTM E-84 Class”A” Fire Retardant Fireproofing.

Up to 4 hours Fire Rating. UL Certified. Reduced DFTs. Cost effective solution to help existing and new building construction meet and exceed fire rating code requirements. Decorative aesthetic architectural finish. Compatible with most non-solvent based topcoats.

RELATED PRODUCTS

In Stock

Description

BENEFITS

Albi Clad TF+ is listed by Underwriters Laboratories for up to 4 hours of fire protection.
Albi Clad TF+ is applied like paint using an airless spray pump leaving an attractive architectural finish. This durable, abrasion-resistant surface does not require a top coat.
Reduces DFTs.
A topcoat can be used for decorative purposes and is suggested if repeated washings are required.
It is VOC compliant and meets all LEED standards.
UL tested for resistance to high humidity, aging, industrial atmosphere (CO₂ /SO₂), and washing.

PHYSICAL PROPERTIES TEST METHOD VALUE

Dry Applied Density 85 PCF
Hardness (Shore D) ASTM D2240 67
Cohesive/Adhesion Strength ASTM D4541 485 psi
Abrasion Resistance ASTM D4060 0.111 grams loss (1,000 cycles)
Impact Resistance ASTM D2794 160 inch-lb@2 mm 11.5±
Weight per Gallon 11.5 + 0.20 lbs./gals
% Solids by Volume 70% ± 2.0%
Flame Spread ASTM E 84 5 – Class A
Smoke Developed ASTM E 84 35 – Class A

DOWNLOADS